Why Is My Blink Camera Flashing RED?

If you’re a Blink camera user, you might have noticed that Blink Camera Flashing RED. It can be concerning, but there are several reasons why your Blink camera flashing red, many of which are easy to fix. 

In this article, we’ll explore some common reasons why your Blink camera might be flashing red and provide some troubleshooting tips to help you get your camera back online. Whether you’re dealing with low battery life, Wi-Fi connection issues, camera placement, or firmware updates, we’ve got you covered.

Low battery 

The common reason why a Blink camera flashes red is that. If the camera’s battery is running low, the battery level drops below a certain point; it will display a red light indicating that it needs to be recharged or replaced. Check the Blink app’s battery level or the camera’s sync module to see if this is the issue.

Wi-Fi Connection Issues

Another reason why your Blink camera may be flashing red is because its having trouble connecting to your Wi-Fi network. It can happen if the camera is too far from your router or obstructions block the signal. To troubleshoot this issue, try moving the camera closer to your router or removing any obstacles blocking the signal. Try resetting your router or restarting your camera.

Camera Offline

One possible reason your blink camera is flashing red and showing offline is that it is not connected to the internet. That could be due to a problem with your WI-FI network, a weak signal, or an issue with the camera’s firmware. The camera might show a red light if disconnected from the sync module or Wi-Fi network. Check if the camera is still connected to the sync module or if there are any network connectivity issues. Still, if the problem persists, contact Blink support for further assistance.

Camera Placement 

The placement of your Blink camera can also affect its performance. If the camera faces directly into the sun or a bright light source, it may struggle to capture clear footage. Similarly, if the camera is placed in an area with poor lighting, it may have difficulty detecting motion.

1. Move the camera to a different location with better lighting conditions.
2. If you’re experiencing issues with your Blink camera, try adjusting the camera placement to see if that improves performance. Consider using a mounting bracket or stand to help position the camera in the optimal location.
3. Ensure that your camera is not pointed at private areas or locations where people reasonably expect privacy.

Recording In Progress 

During recording or live streaming, the Blink camera may show a red light to indicate it is actively capturing footage.

Infrared

In some models, a red light might appear when the camera’s infrared LED are activated, especially in low-light or night vision mode. It is normal behavior and helps the camera capture clear footage in the dark.

Resetting A Blink Mini Cameras

Here are the step-by-step instructions for resetting your Blink mini camera:

1. Locate the reset button on the back of the camera. It’s located near the USB port on the bottom of the camera. It’s usually a tiny pinhole that requires a pointed object like a paperclip or a pin to press it.
2. Open, then press and hold the reset button for 10 seconds. You should see the LED light on the front of the camera turn solid red.
3. After 10 seconds, press the reset button.
4. Download and on the Blink app on your device or tablet.
5. Tap the + plus icon in the top-right corner of the screen and add a new camera!
6. Follow the on-screen instructions to set up your Blink Mini Camera again.